Carbide Brake Lathe Bits
Plus...
Lathe Bit Holders and Holder Conversions

 

Our carbide brake lathe bits are parallel and peripheral ground on Micro Grain C3 Carbide pill blanks. This is the finest material and machining process available and in most every case exceeds that which is performed by the OE Manufacturer. Unconditionally... GWR lathe bits are the highest quality and workmanship available, from any supplier on the world marketplace.
GUARANTEED!
 


If you are shopping the Web for price, we'd like to offer this sincere and important warning.

A lot of web sites are now selling lathe bits, unfortunately most are coming from China.
Additionally, they are made with cheap offshore carbide and would not meet current OEM criteria.
GWR unconditionally guarantees our US made carbide bits are superior to ANY on the web.
If you think you've found a better price somewhere else, we suggest you find out why!

No one can beat our price and quality! No one! If they do you're purchasing bits of less quality, guaranteed!

Still concerned about lowest price?

Our bits have 25% to over 50% longer service life, so our real price is actually $5 to $15 lower than our listed price.
 

Lathe Bits are indexed (dots), packed 10 to a box and includes 10 mounting screws were applicable.

LATHE

PICTURE

RAKE

LATHE MODEL & O.E.M. INFORMATION

PART #

JOBBER

Accuturn

P

7700, 8910, 8911, 8922, 8944, 8989
H.D. Version for replacement of stock bits on all stationary Accuturn lathes.
Note: Super Duty Available - Order PVD1

433796

$29.95
*Quantity
Discount
(Below)

Accuturn (OCL)

N

On Car Lathe - Thicker and stronger than OE Accuturn or other aftermarket bits.

8015

$26.95
*Quantity
Discount
(Below)

Alltool

N

"Double Thick" Heavy Duty Bit Fits: 747

3331

$19.95
*Quantity
Discount
(Below)

Ammco (Std)

N

"Standard Duty" Fits: 1000, 2002, 3000, 4000, 4100, 7000, 7700 Series, 3850 (Drum) Like Ammco, but better carbide. NOTE: DISCONTINUED (USE 6914 HD BELOW)

6914

$16.95
*Quantity
Discount
(Below)

AMMCO (Heavy Duty) Longer Life / Smoother

N

"Double Thick" Heavy Duty Bit Fits: 1000, 2002, 3000, 4000, 4100, 7000, 7700 Series, 3850 (Drum) Twice the life and better finishes, why buy the stock ones?
NOTE: EXTREME PERFORMANCE BITS ALSO AVAILABLE... Our Round & PVD Bits fit these lathes too, call for details!

6914HD

$19.95
*Quantity
Discount
(Below)

Ammco

P

3850, 4000, 7000, 7500
(Must have Positive Rake Tool Holders
)

7681

$39.95
*Quantity
Discount
(Below)

Ammco

P

"Black Coated" 3850, 4000, 7000, 7500 (for Positive Tool Holders only)

6918

$39.95
*Quantity
Discount
(Below)

Bear
 

N

1410, 1467, 1468, 1469 (Drum), 1478 (Rotors) Special version, 30% thicker than standard!

72283

$25.95
*Quantity
Discount
(Below)

FMC
John Bean

P

600, 700 (.020"Radius)
Note: Super Duty Available - Order PVD1

90487
90488

$29.95
*Quantity
Discount
(Below)

FMC
John Bean

N

800 (Large Triangle, 1/64" Radius, No Hole)

92090

$49.95
*Quantity
Discount
(Below)

FMC / John Bean

P

Drum (Right - Parallelogram)

92091

$59.95
*Quantity
Discount
(Below)

FMC/ John Bean (OCL)

P

505 On-Car-Lathe / RTI Style
(Note: #90817 Negative Available Also)

91212

$39.95
*Quantity
Discount
(Below)

Hunter (OCL)



P

OCL-360 "On Car Lathe" (Micro Mini "Round" w/hole). Why buy "Original Branded" at twice price, our performance version actually cuts smoother and lasts longer? (Note: Order Screws Below)

Special OE Screw (Exact Match)
Replacement Screw (Non OE Style)

Professional Torque Wrench
(Helps stop breakage of expensive screws, a quality tool made in Germany)
 

6263





6263-OE
6263-RS

65-0370

$49.95
*Quantity
Discount
(Below)



Call for $
Call for $

$7.95

Hunter

N

BL 300, BL 500, BL 505 OCL (.030" Radius)

5802

$29.95
*Quantity
Discount
(Below)

Hunter

P

BL 300, BL 500, BL 505 OCL (.015" Radius)

6403

$29.95
*Quantity
Discount
(Below)

Hunter

P

BL 300, BL 500, BL 505 OCL (.030" Radius)

5383

$34.95
*Quantity
Discount
(Below)

John Bean / FMC

P

800 (Large Triangle, 1/64" Radius, No Hole)

92090

$49.95
*Quantity
Discount
(Below)

John Bean / FMC

P

800 Drum Lathe (Right Hand - Parallelogram)

92091

$59.95
*Quantity
Discount
(Below)

Kwik Way

P

BDL, CBL, NDL and Kwik Lathe OCL

9223

$29.95
*Quantity
Discount
(Below)

Performance

N

6600, 7100, 7200, 7600 (.030" Radius) NTH

3340

$29.95
*Quantity
Discount
(Below)

Performance

P

6600, 7100, 7200, 7600 (.030" Radius) PTH

8711

$33.50
*Quantity
Discount
(Below)

Pro-Cut (OCL)

P

"On-Car-Lathe" (Newest H.D. OEM Version w/Chip Breaker). Why buy "Original Branded" at a higher price, when our performance version actually cuts smoother and lasts longer.

50742

$42.95
*Quantity
Discount
(Below)

SUPER PURPLE
PVD - High Radius

P

Extreme Duty Positive Rake PVD Coated Bits with Unmatched Life, Speed and Finish !!!
Accuturn, Ammco, FMC, Rels, Kwik-Way, Hunter and Many Other Lathes ( Index them and they'll outlast all other positive triangle bits! The ONLY Positive Rake bit with 6 cutting positions vs standard 3 )

PVD1

$49.95
*Quantity
Discount
(Below)

Rels

N

2000 (With Original Negative Rake Bits)

45001

$24.95
*Quantity
Discount
(Below)

Rels

P

2000 (Must have 45014 and 45015 Tool Holders)
Note: Super Duty Available - Order PVD1

45016

$44.95
*Quantity
Discount
(Below)

Rels

P

204C & others (Large Triangle, 1/64" Radius, No Hole )

29687

$49.95
*Quantity
Discount
(Below)

Rels

P

204,205,300,302 (Left Hand - Parallelogram)

24209

$54.95
*Quantity
Discount
(Below)

Rels

P

204,205,300,302 (Right Hand - Parallelogram)

24176

$54.95
*Quantity
Discount
(Below)

RJ West / Hofmann

P

201, 400 True Cut, 401 On Car, 1115
Note: Super Duty Available - Order PVD1

722834

$29.95
*Quantity
Discount
(Below)

RJ West / Hofmann

N

815, 915 HD "Very Large" Negative Rake

DRL90

$54.95
*Quantity
Discount
(Below)

RJ West / Hofmann

N

300,350,450,915, 915HD "Small" Negative Rake

W136

$29.95
*Quantity
Discount
(Below)

ROUND LATHE BITS

P

"the Original" Ultra Speed & Finish
(Fits Most Lathes) Up to 16 Cutting Positions, plus No Slow Final Cuts. Produces finishes to 30 Ra and better, that's below any triangle bit.

0066

$45.95
*Quantity
Discount
(Below)

RTI

P

BRC 500, BRC 550, BRC 35 OCL
SA: 80001,002

80102

$39.95
*Quantity
Discount
(Below)

Snap-On

P

YA180, YA281
Special High Performance version, 30% thicker than standard!

BTK10

$29.95
*Quantity
Discount
(Below)

Star

N

All
Special High Performance version, 30% thicker than standard!

1776

$29.95
*Quantity
Discount
(Below)

Van Norman

P

303, 304, 305, 404, 405 (Left - Parallelogram)

302167

$54.95
*Quantity
Discount
(Below)

Van Norman

P

204C, 204S, 205, 300, 302 (Right - Parallelogram)

866562

$54.95
*Quantity
Discount
(Below)

Van Norman

P

243XV (Large Triangle w/o Hole) Same as 866561, 564

29687

$44.95
*Quantity
Discount
(Below)

VBG (OCL)

P

"On the Car" #600 & #610 w/ chip breaker design for smoother finish

50742

$42.95
*Quantity
Discount
(Below)

 


Lathe Bits are Packed 10 to a box and include 10 mounting screws were applicable.
Note: These prices are only available when you mention you saw them online
Please call 1(800) 266-4497 to Order
( Order Desk Open 1pm to 8pm EST )

Since we have a $50 Minimum Order, your may want to consider a Quantity Discount

*Quantity Discounts:

3 to 5 boxes of 10 bits... take 5% Off Jobber Price (above)
6 to 9 boxes of 10 bits... take 10% Off Jobber Price (above)
10 or more boxes of 10 bits... take 20% Off Jobber Price (above)
Note: Mixing of bit numbers OK for discount


Don't Miss Our Technical Pages and Money Saving Discounts
(Links at bottom of page)

G.W.R
.... Brake Lathe Bit "Tool Holders"
 

701 / 702
Holders for Ammco "Negative" rake stock lathe bits
(R & L) Set of 2

 
Ammco, Hunter, Performance and Others $34.95
pair
968 / 969

 
Holders for Ammco "Positive" rake stock lathe bits
(R & L) Set of 2

 
Ammco, Hunter, Performance and Others $34.95
pair
422 / 423

 
Holders for "GWR's Super Purple" High Performance lathe bits
(R & L) Set of 2
 
A-Tool, Ammco, Hunter, Snap-On Rels, K-Way, Perform, Others $69.95
pair
426 / 427

 
Holders for "GWR's Round" High Speed lathe bits
(R & L) Set of 2

 
A-Tool, Ammco, Hunter, Snap-On Rels, K-Way, Perform, Others $74.95
pair
286

Zero Angled holders for "Positive" rake stock lathe bits
(R & L) Set of 2

 
Accuturn, FMC $44.95
pair
763 / 764

30 Angle holders for "Positive" rake stock lathe bits
(R & L) Set of 2

 
Accuturn, FMC $44.95
pair
337L / 337R


 
Holders for Hunter's "Round" OCR lathe bits (R & L) Set of 2

 
Hunter OCL (Mini Positive Style) $99.95
pair
5392

 
Positive Rake Ammco Tool Holder Set
for Small Drums
Ammco 3000, 4000, 41000, 7700 Drum

 

$49.95
each
9872

 
Negative Rake Ammco Tool Holder Set
for Small Drums
Ammco 2002, 3000, 4000, 4100, 7700 Drum

 

$29.95
each
428 / 429 Holders for "GWR's Round" High Speed lathe bits
(R & L) Set of 2
 
Accuturn, FMC (Positive Style) $Call
Various All Std. Replacement Holders Available
 
Specify Brand and Model of Lathe $Call

Back to Top/Lathe Bits

To Order Simply Call 1(800) 266-4497
( Order Desk Open 1pm to 8pm EST )


 

G.W.R.... Specialty Products
features and recommends the finest cutting systems in the industry...


ROUND LATHE BITS...
Cut Rotors Five Times Faster!

The "Original" Round Lathe Bits

GWR has the original from 1992, the highest quality Round Carbide Lathe Bit rotor finishing system in the industry.  Because of the exclusive "lock washer" hold down clamp, there is no equal on the market!  A simple tightening of the screw on the proprietary clamp prevents the bit from turning or chattering, unlike the other versions being sold through most parts distributors.  The secret is to look at the screw.  If it is 90 (vertical orientation) to the tool holder body... it is the proper design and will work properly.  Unfortunately some companies have recently tried copying this unique design and are causing confusion in the market place.  It's interesting to note that 10 years ago Ammco said "round bits are bad and would not work".  Now they are saying "Ammco Round Bits Conversion Kits and Bits are just like the ones GWR sell".  Just be careful with these types of copies!  Our holders were engineered to work and have the exact design that assures you the finest finishes, easiest changes and longest life.

GWR Round Bits and Holders
 

Our other preferred "performance" bit, when you like an original triangle style configuration.....
 

GWR's "Super Purple" Lathe Bitstm
There is no equal in automotive triangle bits, this quality is normally only sold to the machine tool industry!





Why GWR Purple PVD bits are the best in the world...

First, the bit is positive rake!  This allows for a finer finish cut when compared to negative rake designs.  Additionally, they will shave through hard spots, not bump over them.  This produces truer rotors, with less possibility of run out.

Second, the bit is larger than the most common brands of carbide lathe bits like Ammco, Hunter, Snap-On, etc., it has a 3/8" I.C. vs 1/4" I.C (Inscribed Circle diameter).  The larger the bits I.C., the better they cut on all fronts and the longer they last because there is less wear on an individual point of contact.

Third, the normally sharp points (like most triangle bits) are rounded to an extreme degree.  This creates a unique slicing or pealing action of the rotor metal, not the ripping or tearing action common to a standard sharp point design.  An additional benefit is you can index the bit, move it to the opposite tool holder after three turns, to increase the number of cutting positions to six.

Fourth, but probably most important, we use the finest grade of carbide and then process it through several heat treatment processes, including a final P.V.D. coating to enhance edge sharpness.  This process is far superior to all other processes, including titanium coatings.  Unconditionally guaranteed, these are the finest bits money can buy!  Plus you pay no more because they double the number of cuts per bit, when you index them.
 

Our PVD coatings are smoother, denser and maintain a sharper edge! 

Notice the layering effect that is clearly visible on the surfaces of these carbide lathe bits.  Also notice the roughness of the actual carbide, this would be your cutting surface if you're not using PVD coated bits.
 

 


GWR Part # 65-PVD1

 


Please click this link to see the complete listing of:

Click here for GWR "Heavy Duty" Brake Lathe Bits

Parallelogram HD Thick Round OEM High Radius

 

GWR Logo 1.jpg (18373 bytes)

Be sure to click on these training and product web pages,
you will save time and money...


 

How to Stop Brake Noise... Guaranteed!
http://www.gwrauto.com/silencer/siluse.html

Six must do critical steps, there are no options here!

   

 

Click here for a $100 Discount
on GWR's Deluxe Brake Service Kit
http://www.gwrauto.com/silencer/starterkit.html

The only OEM Approved Brake Silencer Spray

   

 

Click here for hundreds of
Brake Service Tools and Parts! Discounted up to 70% off
OEM Suggested List Prices
http://www.gwrauto.com/brake_tools.html

   

 

Links to all GWR Products

GWR SPECIALTY AUTOMOTIVE PARTS
GWR Specialty Automotive
Products

Copyright 1996-2012
1(800) 266-4497
Email: sales@GWRauto.com
How to Order from GWR

Order form